This is an idler puller on the belt tensioner for the belt that goes to the fan clutch on a cat motor. This pulley has about a 1/4" groove worn into it from the belt. It was believed that the tensioner was worn out causing the belt to not ride straight across on the pulley causing excessive friction on the pulley and wearing a grove into it. It probably didn't help it either that the fan clutch was also stuck on putting more strain on it.
I got do some wiring hooking up some brake lights, these brake lights don't have connectors so the wires have to be crimped. These lights were also LED so all the little bulbs in the brake lights have to work or they have to be replaced. We also replace all lights like these in pairs so even though the other brake light was still working it got replaced anyways.
We also did a lot of seat covers this week replacing any worn seat cover, damaged seat covers, and the foam pads inside the seat covers. Seat covers can make for a long day.
It doesn't sound like you are much into upholstery work, eh? LOL
ReplyDeleteWe'll talk about those crimp connectors next quarter...remind me.